Average Rating:

Brand: Shure
Model: SM11-CN

Product Description:
The Shure Model SM11 is a miniature dynamic lavalier microphone designed for use in television broadcasting (on camera), for sound reinforcement, in certain radio and motion picture applications, and similar uses where a small, professional-quality, microphone is required. The SM11 has an omnidirectional pickup pattern, and its frequency response is optimized for lavalier use. The microphone is supplied with a tie clasp assembly, tie tack assembly, connector belt clip, and zippered carrying/storage bag. An optional kit for mounting the SM11 on various musical instruments is available as Shure Model RK279.Frequency response optimized for lavalier use. Acoustically matches most stand- or desk-mounted microphonesSmall and lightweight for unobtrusive, virtually unseen operationSmooth exterior and recessed grille screen minimize clothing noiseRugged aluminum case constructionExtremely flexible long-life cableTwo mounting options -- tie clasp or tie tackConvenient, secure belt clip attaches connector to belt or clothing

Features:

• Frequency response optimized for lavalier use-acoustically matches most stand- or desk-mounted microphones
• Small and lightweight for unobtrusive, virtually unseen operation
• Smooth exterior and recessed grille screen minimize clothing noise
• Rugged aluminum case construction
• Extremely flexible long-life cable

Special Features: nv: Model^SM11-CN | Product Type^Lavalier Mic | Frequency Response^50 to 15,000 Hz | Polar Pattern^Omnidirectional | Output Level at 1,000 Hz^Open Circuit Voltage 64 dBVPa 0.60 mV1 Pa 94 dB SPL | Impedance^Microphone rating impedance is 150 ohms for connection to microphone inputs rated at 19 to 300 ohms | Polarity^Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 | Hum Pickup^35 dB equivalent SPL in a 1 millioersted field | Cable^Non-detachable, 1.2 m 48

Available at Amazon
List Price: USD 144.00
Lowest New Price: USD 94.99

Average Rating:

Brand: Shure
Color: Black
Model: SM93
Release Date: 1993-09-20

Product Description:
The SM93 is an economical omnidirectional miniature lavalier condenser microphone designed for use in speech applications. Despite its small size, the microphone element provides full, clear sound comparable to that of much larger microphones. Its frequency response is tailored to body-worn applications, with low-end rolloff and presence rise.
Amazon.com Product Description:
Providing a full, clear sound comparable to that of much larger microphones, the Shure SM93 omnidirectional miniature lavalier condenser microphone is ideal for body-worn applications in TV broadcasting, theater, and sound reinforcement. Its frequency response is tailored to body-worn applications, with low-end rolloff and presence rise.

The Shure SM93 lavalier microphone with preamplifier assembly.

Includes tie clip and sew-on mounting bracket.

Includes tie clip and sew-on mounting bracket.

Intended for wired applications, the SM93 is powered by phantom power supplied by broadcast, sound reinforcement or recording equipment, or an external phantom supply, and it includes a preamplifier assembly for connection to three-pin professional (XLR) audio connectors.

The SM93 is supplied with a sew-on mounting bracket, a mounting block with attached tie bar, and an acoustic windscreen to minimize wind noise in outdoor applications. It is also supplied with a dual mounting block with attached tie bar.

Key Features

• Subminiature lavalier design; ideal size for theater, television broadcasting, video, film, and sound reinforcement
• Small, inconspicuous mounting hardware
• Full, clear sound comparable to larger microphones
• Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
• Controlled low-frequency rolloff reduces low-frequency clothing and room noise
• Low distortion, wide dynamic range
• Versatile mounting accessories allow a variety of low-visibility applications
• Preamplifier assembly can be pocketed, strapped to the body, or clipped to belt or waistband
• Omnidirectional condenser

Mounting the Microphone
The tie clips and mounting bracket provided with the SM93 allow the user to wear the microphone in a variety of ways. To achieve optimum pickup, attach the microphone to the user's chest. You can also obtain high-quality sound when the microphone is worn in the hair, sewn into clothing, or attached to an acoustic instrument such as a guitar.

• Tie Clip. A spring-loaded clasp attaches easily to a necktie, lapel, blouse, or shirt. Snap the microphone into the clip's mounting bracket and attach the clip to an article of clothing. The dual tie clip supplied with the SM93 provides simultaneous mounting of two microphones.
• Sew-On Bracket. Sew the supplied sew-on mounting bracket directly to a garment (Figure 1). Use dark or light thread as necessary to match the color of the bracket.

Specifications

• Type: Condenser (electret bias)
• Frequency Response: 80 to 20,000 Hz, 12 dB/octave rolloff below 100 Hz
• Polar Pattern: Omnidirectional, uniform with frequency
• Output Impedance: Rated at 150 ohms (90 ohms actual)
  Recommended minimum load impedance: 800 ohms (may be used with loads as low as 150 with reduced clipping level)
• Output Level (1 Pascal = 94 dB SPL):
  • Open Circuit Voltage: -43 dBV/Pa (7.0 mV)
• Output Clipping Level (at 1,000 Hz): -18 dBV (0.13 V) minimum
• Total Harmonic Distortion: Less than 1% at 120 dB
• Maximum SPL: 120 dB
• Dynamic Range (maximum SPL to A-weighted noise level): 98 dB
• Output Noise (equivalent SPL): 22 dB typical, A-weighted; 26 dB, weighted per DIN 45 405
• Hum Pickup (electromagnetic): -4 dB equivalent SPL in a 1 mOe field (60 Hz)
• Signal-to-Noise Ratio: 72 dB at 94 dB SPL (IEC 651)
• Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output cable connector
• Current Drain: 0.33 mA
• Cable: Black, 4.17 feet, attached, two-conductor, shielded, terminated by miniature connector type (TA4F)
• Case:
  • Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille
  • Preamplifier: Steel case with non-reflective black finish, black-chrome belt clip
• Weight:
  • Microphone: 0.57 ounces
  • Preamplifier: 4.17 ounces

Features:

• Subminiature lavalier design; ideal size for theater, television broadcasting, video, film, and sound reinforcement
• Full, clear sound comparable to larger microphones
• Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
• Versatile mounting accessories allow a variety of low-visibility applications
• Omnidirectional condenser

Special Features: nv: Model^SM93 | Product Type^Lavalier Microphone | Type^Condenser electret bias | Frequency Response^80 to 20,000 Hz, 12 dBoctave rolloff below 100 Hz | Polar Pattern^Omnidirectional, uniform with frequency | Output Impedance^Rated at 150 90 actualRecommended minimum load impedance 800 | Output Level1 Pascal 94 dB SPL^Open Circuit Voltage 43 dBVPa 7.0 mV | Output Clipping Levelat 1,000 Hz^18 dBV 0.13 V minimum | Total Harmonic Distortion^Less than 1 at 120 dB | Maximum SPL^120 dB | Dynamic

Available at Amazon
List Price: USD 248.22
Lowest New Price: USD 133.78

Average Rating:

Brand: Shure
Color: Black
Model: C606WD
Release Date: 2005-09-29

Product Description:
Shure All Purpose Microphone C606WD - Shure makes audio equipment - microphones, earphones, mixers, etc. that are used by professional musicians the world over. Shure knows sound. They've applied their decades of audio technology to creating a performance microphone for the amateur user/music enthusiast. The C606WD is a great mic for karaoke, sound reinforment, and multimedia applications. The C606WD is compatible with most major sound cards. Whether in a classroom, meeting room, church or performance hall, its wide frequency response, unidirectional pickup pattern, and high output make vocal performances sound clear and vibrant. It is also suitable for instrument pickup. Ready to plug and play, with 15' (4.5 meters) XLR-1/8" (3.5mm) cable and 1/4" (6.3 mm) adapter included in the box. Specs for the C606WD Dynamic Cardioid Microphone: Frequency Range -- 50-12,000 Hz; Impedance -- 600 Ohm; Sensitivity -- -52 dBV/Pa at 1kHz (Pa=94 dB SPL).
Amazon.com Product Description:
A great mic for karaoke, sound reinforcement, and multimedia applications, the Shure C606-WD microphone features a wide frequency response, unidirectional pickup pattern, and high output to help make vocal performances sound clear and vibrant.

Whether in a classroom, meeting room, church or performance hall, its wide frequency response, unidirectional pickup pattern, and high output make vocal performances sound clear and vibrant. It's also suitable for instrument pickup. Ready to plug and play (compatible with most major sound cards), it features a 15-foot XLR-1/8" (3.5mm) cable and 1/4" adapter included in the box. Specifications Transducer: Dynamic Polar Pattern: Cardioid Frequency Response: 50Hz - 15kHz Sensitivity: -52 dBV/Pa (1000 Hz) Output Impedance: 600 ohms Output Connectors: XLR-3M Type Cable: 15.0 feet

Frequency response. Polar pattern.

Features:

• Includes 15' (4.5 meters) XLR-1/8" (3.5mm) cable and 1/4" (6.3 mm) adapter
• Frequency Range -- 50-12,000 Hz; Impedance -- 600 Ohm; Sensitivity -- -52 dBV/Pa at 1kHz (Pa=94 dB SPL)
• Designed by Shure, the world's leading professional high-end audio experts for musicians.
• Great, easy to use mic for karaoke, vocal amplification, and multi-media applications - compatible with most major sound cards.
• Wide frequency response, unidirectional pickup pattern, and high output make vocal performances sound clear and vibrant.

Available at Amazon
List Price: USD 29.99
Lowest New Price: USD 29.95